Flexco Products

 

Baler Belt Products

 

Commercial Laundry

 










Payment Processing
Category Index
300 Series Stainless Spring Wire Pins (SS62)
ADC
Alligator Non-Metallic Fasteners
Alligator Spiral Lace
  > Belt Punch
  > Fasteners
  > Leader Pins
  > Plastic Rivet Lube
  > Replacement Hinge Pins
Bulk Fasteners
Comb Assembly
Curling Bit
Hinge Pins
Installation Tools
Plastic Rivet
Templets
Baldor Motors
Hinge Pins For 125 Staples
Mato Tools
RS62 Fasteners
RS62 Stainless (Type 316) Fasteners
Scanner Eye Mounting
Alligator Rivet Section
Alligator Belt Grinder
Alligator Rivet Fasteners
Alligator RSC Rivet Installation Tools
  > Replacement Parts for Installation Tools
Replacement Hinge Pins
Belt Fasteners
Alligator Rivet Fasteners
Alligator Staple Fasteners
Rectangular High Tensile (RHTX)
Alligator Staple Section
Alligator RS62 Series Staples
  > Steel Fasteners RS62
  > Stainless (Type 316) Fasteners RS62
Alligator RS125 Series Staples
  > Steel Fasteners
  > Stainless Fasteners (Type 316)
Alligator RS187 Fasteners
  > Steel Fasteners RS187
  > Stainless (Type 316) Fasteners RS187
Hinge Pins
  > Hinge Pins For 62 Staples
    • Nylon Covered Steel Cable NC62 (For 62 Staples)
    • Nylon Covered Stainless Cable (NCS62)
    • Steel Spring Wire Pin (SP62)
    • 300 Series Stainless Spring Wire Pins (SS62)
  > Hinge Pins For 125 Staples
    • Nylon Covered Steel Cable (NC1)
    • Nylon Covered Stainless Cable (NCS1)
    • Steel Spring Wire Pins (SP1)
    • 300 Series Stainless Spring Wire Pins (SS1)
  > Hinge Pins For 187 Staples
    • 300 Series Stainless Spring Wire Pins (SS2)
    • Nylon Covered Stainless Cable (NCS187)
    • Nylon Covered Steel Cable (NC187)
    • Steel Spring Wire Pin ( SP2)
Alligator Ready Set Staple Tool Kits Complete
Installation Accessories
Installation Tools
Replacement Parts (Installation Tools)
Baler Belt Tools
Alligator Rivet Tools
Alligator Staple Tools
Cutters
Lacers
Skivers
Flatwork Ironer
FWI Guide Tape
  > Aramid Tape
  > Blended Tape
  > Polyester Tape
  > Zip Tape
Belt Clamps
Far-Pul HD Clamps
Smart Clamps
Belt Cutters
14" Belt Cutters
#25 Belt Cutters
840 Series Aluminum Belt Cutters
845LD Series Aluminum Belt Cutters
900 Series Belt Cutters
Laser Belt Square
Gathering Wheels
CASE-HI 8450 and 8455
GEHL 1500, 1600, 1850, 1860
HESSTON 530,540, 745
HESSTON 550, 555, 560, 565
HESSTON 5540 and 5545
HESSTON 5580 and5585
JOHN DEERE 430,435, 466, 467
MASSEY FERGUSON 1560 and 1745
NEW HOLLAND 640, 648, 660, 688
VERMEER
Starter Flaps
Belt Skivers
Clipper G Series Lacing
Hinge Pin in 30M Coil
Electric Belt Cutters
Chicago Dryer
Ribbons-Chicago
  > Antistatic
  > Aramid Belts
  > Canvas Belts
  > ELASTIC
  > HiLyfe
  > Nylon
  > Perforated
  > Polyester
  > PolyFlake
  > Rough Top
  > Rubberized
  > Snowflake
  > Tev-Tex
  > With Cleats
  > With Guides
Dependo Drain Valves
Go to Our Home Site
Returns
Shipping
Site Help / FAQ
About Us
Flexco Hooks & Pins
Carded Hooks
  > #1 (40) Series Hooks
    • Galvanized 6" Without Pins
    • Galvanized 6" With Pins
    • Galvanized 12" Without Pins
    • Galvanized 12" With Pins
    • High Tensile - Without Pins
    • 430 Stainless 6" - With Pins
    • 430 Stainless 6" - Without Pins
    • 430 Stainless 12" With Pins
    • 430 Stainless 12" Without Pins
    • 316L Stainless - Without Pins
  > #25 Long Point Fasteners
  > #25 Series Hooks
    • #25 Precut Hooks With Pins - Galvanized
    • #25 Precut Hooks With Pins - 316 Stainless
    • #25 Galvanized - 6" Lengths Without Pins
    • #25 Galvanized 6" - With Pins
    • #25 Galvanized - 12" Lengths Without Pins 12/Box
    • #25 Galvanized - 12" Lengths With Pins 12/Box
    • #25 316L Stainless - 6" Lengths Without Pins
    • #25 316L Stainless - 6" Lengths With Pins
    • #25 316L Stainless - 12" Lengths 12 Cards/Box
  > #36, 30 & AP Series Hooks
    • 316L Stainless - Without Pins - 12" Lengths
    • 316L Stainless Without Hinge Pins - 12" Lengths
    • AP Carded Low Profile 316 Stainless - W/O Pins 12"
    • Hastelloy - Without Pins - 12" Lengths
  > #54 Regular Series Hooks
    • 2-7 Galvanized 12" Without Pins
    • 2-7 Galvanized 12" With Connecting Pins
    • 2-6 High Tensile 12" Long Without Pins
    • 4-1/2 Rectangular High Tensile 12" Without Pins
  > Unibar Hooks
    • UCM36, UX-1, U2-U5 Stainless Without Pins 6"
    • 430 Stainless 6" Without Pins - UX-1, U2SP-U7
    • UCM36, UX-1, U2-U5 Stainless No Pins 12" Length
    • 430 Stainless 12" Without Pins - UX-1, U2SP-U7
    • UCM36, UX-1, U2-U5 Stainless No Pins 24" Lengths
    • 430 Stainless 24" Without Pins - UX-1,U2SP-U7
    • Stainless Rectangular High Tensile Without Pins U3
    • Coated Steel 6" Without Pins U1-U5
    • Coated Steel 12" Without Pins U1-U5
    • Coated Steel 24" Without Pins U1-U5
    • U2-U6 Coated Steel With Pins
Connecting Pins
  > Leader Assemblies (Duralink)
  > Leader Assemblies (Nylon Covered)
  > PinPacks 100ft
    • Nylosteel Pinpack 100
    • Nylon Plus Pinpack 100
    • Nylostainless PinPack 100
    • Duralink Pinpack 100
    • Nylon Covered Cable PinPack 100
    • Dura Stainless Pinpack 100
  > .065" Pre-Cut Pins
    • NyloStainless
    • NyloSteel
  > 12" Pre-Cut Pins
    • Nylon Plus
    • NyloStainless
    • Nylosteel
  > Connecting Pins (Coils Per Foot)
    • NyloSteel
    • Duralink
    • NyloStainless
    • DuraStainless
    • Nylon Covered Cable
    • Notched Steel
    • Bare Stainless Steel Cable
    • Smooth Steel
    • Notched Stainless Steel
    • Nylon Plus
    • Smooth Stainless Steel
    • Music Wire
    • Stripped Leaders
  > Connecting Pin Tools
Food Grade Precleaner (FGP)
Food Grade Precleaners
Optional Mounting Brackets (FGP)
FGP Replacement Blades
FGP Replacement Springs
FGP Replacements Parts
Laundry Patch Fasteners
Corrugated Perlon
Fasteners-Laundry Patch
  > #25 Short-Point 316L Stainless
  > #25 Short-Point 316L Stainless Low Temp
  > #25 Short-Point Galv. Low Temp
  > #25 Short-Point Galvanized on Patch
Production Lacers-Clipper
Manual Roller Lacers
Face Strips
  > Hook Size 30
  > Hooks Size 36, UCM36
  > Hook Size 1, UX-1
  > Hook Size 2-4, U2SP-U3
  > Hook Size 4-1/2-7,U4-U7
Manual Roller Lacer Repair Parts
Replacement Lacer Pins
Micro Lacers
Clipper Face Strips
Common Repair Parts
G Series Face Strips
G Series Replacement Lacer Pins
Novitool
Aero 300 Press
  > Aero Press Power Cords
    • 230 Volts Single Phase 60HZ
    • 230 Volts Three Phase 60HZ
    • 400 Volts Three Phase 50HZ
    • 400 Volts Three Phase 60HZ
  > Amigo Monolithic Press
    • Amigo Optional Accessories
    • Amigo Templates
    • Cables
  > Ply 130 Separator
    • Ply 130 Blades
    • Ply 130 Cart
    • Ply 130 Step Cutter
  > Press Stand
  > Pun M Manual Punch
    • Pun M
    • Pun M 300 Punchboards
    • Pun M 600 Punchboards
    • Pun M 900 Punchboards
    • Replacement Parts
  > Silicone Press Pad/Cloths
  > Splice Tape
Aero 325 Press
Pun M NDX
Production Lacers
#12 Speed Lacer
  > Hook Retainers for #12 Speed Lacer
AMU 4000 and 6000 Lacers
  > Combs for AMU 4000/6000
  > G Series Combs AMU 4000/6000
  > Replacement Lacer Pins for AMU 4000/6000 Lacers
Electric Hydraulic Power Lacers
  > Hook Retainers for Power Lacers
  > Electric Hydraulic Lacer Covers
  > Replacement Lacer Pins for Power Lacers
PRO-200 Lacer
  > Adapters For PRO-200 Lacer
  > Replacement Lacer Pins for PRO-200
PRO-400 Lacers
  > Adapters For PRO-400 Lacer
  > Replacement Lacer Pins for PRO-400
Production Lacer Replacement Parts
Roller Lacer Gold Class
Face Strips Gold Lacer
Replacement Lacer Pins
Specialty Lacers
Plier-Tape Lacers
Vise Lacers
LW95 Lacers
  > Replacement Hook Retainers for LW95
Baler Belt Lacers
Lever Lacers
Tatch-A-Cleats
Econo-Cleat
Economy Carton
  > Extra Fastener Sets (Econo)
Installation Tools
Model "HD" Cleats
  > Extra Fasteners Set AB
    • Plated Fasteners (AB)
    • Stainless Fasteners (AB)
Model "L" Cleats
  > Extra Fasteners Sets
    • Plated Fastener Sets
    • Stainless Fastener Sets
Rubber Bondable
  > Flanges
  > T-Cleats
  > V-Guide (Buffed)
  > V-Guide (Unbuffed)
Tatch-A-Guide
TATCH-A-LUG
Tatch-A-Peg
Transfer Solutions
Segmented Transfer Plates
  > Horizontal to Horizontal/Waterfall Applications (1.5" to 3" Gaps)
    • Belt Widths 24 Inches (1.5")
    • Belt Widths 36 Inches (1.5")
    • Belt Widths 42 Inches (1.5")
    • Belt Widths 48 Inches (1.5")
    • Belt Widths 60 Inches (1.5")
  > Horizontal to Horizontal/Waterfall Applications (4" to 10" Gaps)
    • Belt Widths 24 Inches
    • Belt Widths 36 Inches
    • Belt Widths 42 Inches
    • Belt Widths 48 Inches
    • Belt Widths 60 Inches
  > Belt To Chute or Slide Applications
    • Belt Widths 24 Inches (chute)
    • Belt Widths 36 Inches (chute)
    • Belt Widths 42 Inches (chute)
    • Belt Widths 48 Inches (chute)
    • Belt Widths 60 Inches (chute)
Segmented Plates Replacement Parts
  > Bridge Segments
  > Center Segments
  > End Segments
  > Mounting Brackets
  > Support Bars
Hitch Guards
  > Scanner Eye Mounting Replacement Parts
  > Universal Mounting
  > Universal Mounting Replacement Parts
Hays Valves